Perimeter Securityperimeter Security
| Redwall® 4010/404/3020
||The Redwall 4010, 404 and 3020 are PIR sensors specifically designed for external CCTV detection applications. Their small size, attractive appearance and accurate detection makes them ideal for the activation of video transmission systems and the positioning of pan and tilt or dome cameras. They can also be used on manned CCTV systems to alert an operators attention to movement in a specific area. These detectors are single ended devices and do not emit or transmit signals. They are safe for use in all applications.
||The MegaRed is the world's first dual output external long range passive infrared detector for external operation at ranges of up to 180 metres.
MegaRed is designed for use with CCTV systems to alert an operator's attention to a specific area or, with the zoned outputs, to activate positioning of a dome or pan and tilt camera system. It is also ideal for the activation of video transmission systems.
||The Redwall 100Q is a rugged external long range passive infrared detector. It is designed to provide reliable intruder detection at distances of up to 100 metres (330').
| Redwide® 5030
||The Redwide 5030 is a rugged external long range wide angle passive infrared detector. It is designed to provide reliable intruder detection at distances of up to 50 metres (160 feet) over a 30 degree span.
||The Redwatch range of camera/detectors combine quality external long range detectors with a high performance video camera module to provide the ideal package where alarm activations need to be verified by a video image. Whether your application is for video transmission systems, alarm inputs to multiplexers or to activate video recording equipment, Redwatch provides the reliable and cost effective solution.
| Rednet® I.R. Beams
||The Rednet series of active infrared photobeams is a range of detection devices for both internal and external applications. The system utilises the infrared transmission to synchronise transmitters and receivers and removes the need for hardwire connections between towers. This feature greatly reduces installation time and cost. An automatic graded alarm response system uniquely combines the ability to provide high levels of detection with a low potential for false alarms.
| Redwall® Wire-Free
||Installation time and expense will be greatly reduced in systems using the new Wire-Free range of Redwall® detectors and alarm transmission equipment.
The Wire-Free system is made up from two parts.
Detectors for the system are based upon the successful LRP 404, 4010 & 3020 detectors. These detectors while still offering the coverage patterns of the existing units have been modified so that their current consumption is now an ultra-low .15mA.
Cable from the detector to the dome or controller has been replaced by a radio signal. The batteries in the transmitter housing contain enough energy to power a detector and the transmitter for up to three years, making wire-free a real alternative to existing hardwire techniques.
||The Videswitch is designed to reduce installation time and cost in applications where detectors are to be added to existing CCTV systems. Using the existing coaxial cable Videswitch can transport alarm information alongside the video signals from a detector camera, back to a control point. The units operate bi-directionally allowing installers to send and receive alarms from either end of the cable.
| Interswitch LRP105
||The Interswitch is a lighting controller for use with all Redwall detection products. The device can be powered directly from a 220/240vac supply, or 110vac input models can be ordered. The Interswitch is able to perform a variety of functions to make inclusion in any detection system simple.